Tecno Pop 7 Pro BF7 firmware flash file

Why do we need Tecno Pop 7 Pro BF7 firmware ( flash file ) ?

1. Unlock your Tecno Pop 7 Pro BF7 device.

2. Update the new Android system update for Tecno Pop 7 Pro BF7.

3. Fixed issue with Tecno Pop 7 Pro BF7 OTA update.

4. Fix the device startup loop issue.

5. Fix your phone's Android system update.

6. Fix lagging or freezing on Tecno Pop 7 Pro BF7.

7. Tecno Pop 7 Pro BF7 battery drain issue fixed.

8. Improved software performance.

9. The return of the stock ROM entitles the warranty for the Tecno Pop 7 Pro BF7.

10. If your Tecno phone boots into recovery right away

This guide shows step by step instructions on how to flash Tecno Pop 7 Pro BF7 firmware ( flash file ) or custom firmware using Smart Phone Flash Tool ( SP Flash Tool ) on a Windows computer.

How to Flash Tecno Pop 7 Pro BF7 firmware ( flash file ) with SP Flash Tool

Before proceeding with the flashing process, it is recommended that you complete the preparation steps below to ensure that the flashing process runs smoothly.

Preparations:

If possible, back up all your important data on your computer. Flashing will erase all your data and settings.

Make sure your Android device is sufficiently charged. Before flashing, it is recommended to charge the device at least 50–60%.

Flash Stock ROM with Smart Phone Flash Tool (SP Flash Tool)

Step 1: Download and install the required Android USB drivers on your computer. If you already have Android drivers installed, skip this step.

Step 2: Download the Tecno Pop 7 Pro BF7 firmware  ( flash file ) for your Android device  below and extract it to your computer.

Step 3: Download and extract the SP Flash Tool onto your computer. Once extracted,

Step 4: Run the Smartphone Flash Tool by double-clicking the "Flash_Tool.exe" file.

Step 5: After launching the SP Flash Tool, click on the "Download" tab.

Step 6: Now click the "Scatter-loading" button.

Step 7: Locate the Scatter File (you will find the scatter file inside the firmware folder, which you have extracted

Step 8: Now click the Download button to start the flashing process.

Step 9: Turn off your Tecno Pop 7 Pro BF7 

Step 10: Now connect your smartphone to your computer using a USB cable). After connecting the device to the computer, press the volume down or volume up button so that the flash tool can easily detect your smartphone.

Step 11: Once the device is detected, the flashing process should begin, and the firmware will be installed on your phone. When you're done, you'll see a "Download OK" box with a green checkmarked ring.

Step 12: Now close the SP Flash Tool, disconnect the device from the computer, insert the battery (if removed) and turn on the device.

Important Notes:

[*] Disclaimer: Firmware flashing is a laborious operation that should only be done if you have the necessary knowledge. Your device may be damaged, but neither we nor anyone else should be held liable.

[*] Take a Backup: If you are going to flash the above firmware on your  Tecno Pop 7 Pro BF7 device, then make sure to take a backup of your data as it will be deleted after flashing the stock firmware.

[*] Broken link? Report here.  Click link > https://wa.me/LexzyTechinc 

[*] Have we missed any device model ? Let us know by contacting us via Contact Us page.  https://www.lexzytechinc.com/connect-with-us