Embedded Files
Server migration complete! Visit https://lexzytechinc.com/ enjoy improved experience. Thank you for your patience and support for the past 2 years.
NETWORK Technology
GSM / HSPA / LTE
Release Announced 2021, October 12
Conditions exist. Released 2021, November 19
Dimensions 173.1 x 78.4 x 8.7 mm (6.81 x 3.09 x 0.34 in)
209 pounds (7.37 oz)
Make mirror front, plastic frame, plastic back
SIM Dual SIM (Nano-SIM, rear)
IPS LCD display, 120Hz
6.95 inch long, 114.7 cm2 (~ 84.5% screen size)
1080 x 2460 pixels resolution (7 387 ppi)
Platform OS Android 11, XOS 10
Chipset Mediatek Helio G96 (12 nm)
Octa-core CPU (2 × 2.05 GHz Cortex-A76 & 6x2.0 GHz Cortex-A55)
GPU Mali-G57 MC2
MicroSDXC memory card slot (dedicated slot)
Within 128GB 4GB Ram, 128GB Ram 8GB
UFS 2.2
Three core camera 64 MP, f / 1.7, (width), 1 / 1.72 ", 0.8µm, PDAF
13 MP, f / 2.5, 50mm (telephoto), 1 / 3.1 ", 1.12µm, PDAF, 2x optical zoom
2 MP, f / 2.4, (depth)
Features Quad-LED flash, HDR, panorama
Video 1440p @ 30fps
SELFIE A 16 MP camera
Video 1080p @ 30fps
Sound Yes, with two speakers
Jack 3.5mm Yes
COMMS WLAN Wi-Fi 802.11 a / b / g / n / ac, integrated network, Wi-Fi Direct, hotspot
Bluetooth Yes
GPS Yes, with A-GPS
NFC No
Radio FM radio
USB Type-C 2.0, USB Go
Fingerprint sensor (added part), light sensor, gyro, proximity, compass
Li-Po 5000 mAh battery, not removable
33W fast charging
MISC Senior Mithril Gray, Haze Green, Blue Grass
AnTuTu Experimental Services: 290797 (v8), 343527 (v9)
GeekBench: 1800 (v5.1)
GFXBench: 11fps (ES 3.1 on screen)
Display resolution: 1610: 1 (total)
Camera / video
Microphone -23.0 LUFS (Excellent)
Battery life
128h endurance
X697 model
Recent Added files
Itel P37 (P651W) Factory Firmware ( flash file )
Infinix Zero 5G X6815B firmware (Flash File)
Itel A512W V005 220927 11 SPD firmware ( flash file )
Infinix note 11 pro x697 factory firmware ( flash file )
realme narzo 50 5g rmx3571 firmware ( flash file)
Lenovo Z5s (L78071) Factory firmware ( flash file )
How to flash Infinix note 11 pro x697 mediatek Android mobile phone using SP Flash Tool
There are so many ways to flash Android mobile devices available and presented on the Internet, and you can use any process that is compatible with your smartphone's processor. Some require a PC to complete the flashing, but in this tutorial I'm using SP Flash Tool.
To flash or install firmware on mediatek (MTK) devices
1. You need to download and install SP Flash Tool and USB drivers on your computer. But If you have already installed the tool on your computer, then skip this step.
2. Search and download your mobile phone firmware from here (Mediatek (MTK) Supported Firmware) for your device than extract the zipped file to your computer.
3. Turn off your device for at least 8-9 seconds
4 load the extracted firmware to sp flash tool by clicking on (scatter-loading)
6. Click start and connect the phone to your Computer using the USB Cable. on some mediatek devices you will need to hold volume down or up before connecting your phone.
8. The Flash Tool will recognize the phone. if USB drivers where installed
9. The flash tool should Begin the Flashing Process.
10. Once, flashing process is completed you will see the Success Message in the Flash Tool ( download OK )
Congratulations! Now Close the sp flash Tool and Disconnect your phone from the Computer and set it up.
Google Sites
Report abuse