Samsung Galaxy A54 5G SM-A546E/DS Binary 1 Firmware ( flash file )

Connect your phone using USB cable, and tap on the Start button.

The Samsung phone should connected, now click on the Next button. 

Now select the latest Version to download. After the Downloading is completed, click on the Start to Upgrade button. 

Next you need to boot your Android device in to Download Mode, then click on the Next button. After that, disconnect your device and reconnect it again to put it in Download Mode. 

Now wait for the upgrading process to finished and BOOM you are done! 

Odin flash tools manually flash Samsung mobile firmware's (flash files), its also known as Odin Multi Down-loader, Odin can be used to downgrade or upgrade an android OS, root or unroot, unbrick, and restore back to factory settings.

Steps to manually flash Samsung mobile firmware's with Odin:

Step 1. Download and install "Samsung USB Driver below or click  here"  download Odin Flash Tools below or  here and  Samsung Galaxy A54 5G SM-A546E/DS Binary 1 Firmware ( flash file ) below on your computer.

Step 2. Now "Turn off" your Samsung device and boot in to download mode.

this is a direct executable application. Run the application as an administrator on your computer.

Step 3. Press and hold "Power button, Volume Down button, and the home button" together when it feels a vibration, release the power button but keep holding the other buttons until a window with a yellow triangular mark appears on the device. Then press the volume up key. You will see a green colored Android robot with the text "Loading" "Do not disable target" when booting in download mode.

Step 4. Extract the  downloaded stock ROM/ firmware ( SM - S916B _ S916BXXU1AWA6 _ ZTO.zip ( 8.3G )   ) to navigate and select the file to be loaded on the odin flash tools .

Step 5. Press the "PDA" or "AP" button to upload the downloaded stock/firmware(flash file) to the app. When you click on this button,  navigate and select the downloaded file.

Step 9: After successfully uploading the firmware file, click on the "Start" button to begin the process. Make sure you don't use your device during the flashing process, otherwise your device may be brick

Finally, a green message labeled PASS! will appear on the Odin Download Tool and the device will reboot automatically its DONE