Embedded Files
Server migration complete! Visit https://lexzytechinc.com/ enjoy improved experience. Thank you for your patience and support for the past 2 years.
infocus m808i stock rom / factory firmware ( flash file ). This flash file will help you upgrade, downgrade or reinstall the stock firmware ( os ) on your mobile device.
In addition, the firmware file ( rom ) also allows you to restore the mobile device if it encounters any software problems, e.g.
bootloop problem, imei problem or dead problem
Specifications
General
In The Box
QSG, Headset, USB Cable, 1 HeandSet, Ac Charger
Model Number
M808i
Model Name
M808i (4G VoLTE)
Color
Mysterious Silver
Browse Type
Smartphones
SIM Type
Dual Sim
Hybrid Sim Slot
Yes
Touchscreen
Yes
OTG Compatible
Yes
Additional Content
A C Charger, Headset
Display Features
Display Size
13.21 cm (5.2 inch)
Resolution
1920 x 1080
Os & Processor Features
Operating System
Android Lollipop 5.1
Processor Type
0 0 Octa Core 1.3GHz
Processor Core
Octa Core
Primary Clock Speed
1.3 GHz
Memory & Storage Features
Internal Storage
16 GB
RAM
2 GB
Memory Card Slot Type
Hybrid Slot
Camera Features
Primary Camera
13MP Rear Camera
Connectivity Features
Network Type
3G, 4G VOLTE, 2G
Supported Networks
WCDMA, 4G LTE
Battery & Power Features
Battery Capacity
2450 mAh
Warranty
Warranty Summary
1 Year Manufacturer Warranty
How to flash infocus m808i factory firmware ( flash file ) using SP Flash Tool
There are so many ways to flash Android mobile devices available and presented on the Internet, and you can use any process that is compatible with your smartphone's processor. Some require a PC to complete the flashing, but in this tutorial I'm using SP Flash Tool.
To flash or install firmware on infocus m808i
1. You need to download and install SP Flash Tool and USB drivers on your computer. But If you have already installed the tool on your computer, then skip this step.
2. Search or download infocus m808i factory firmware ( flash file ) blow or click here to view all (Mediatek(MTK) Supported Firmwares). if you have already downloaded the firmware for your device than extract the zipped file to your computer.
3. Turn off your device for at least 8-9 seconds
4 load the extracted firmware to sp flash tool by clicking on (scatter-loading)
6. Click start and connect the phone to your Computer using the USB Cable. on some mediatek devices you will need to hold volume down or up before connecting your phone.
8. The Flash Tool will recognize the phone. if USB drivers where installed
9. The flash tool should Begin the Flashing Process.
10. Once, flashing process is completed you will see the Success Message in the Flash Tool ( download OK )
Congratulations! Now Close the sp flash Tool and Disconnect your phone from the Computer and set it up.
Google Sites
Report abuse