Embedded Files
Server migration complete! Visit https://lexzytechinc.com/ enjoy improved experience. Thank you for your patience and support for the past 2 years.
NETWORK Technology
GSM / HSPA
Release announced 2013, September. Released 2014, March
Do not stop the situation
Dimensions 112.5 x 62 x 12 mm (4.43 x 2.44 x 0.47 in)
Weight 100 g (3.53 oz)
SIM Single SIM (Mini-SIM) or Dual SIM (Mini SIM, in dual mode)
TFT Type Display, color 256K
3.5 inch, 36.5 cm2 (~ 52.3% screen size on body)
Resolution 320 x 480 pixels, 3: 2 resolution (~ 165 ppi)
Platform OS Android 4.2 (Jelly Bean)
CPU Dual-core 1.0 GHz
MicroSDHC memory card slot (dedicated space)
Within 4GB 512MB RAM
2MP Large Camera
Video Yes
SELFIE CAMERA No
Sounds Yes
Jack 3.5mm Yes
COMMS WLAN Wi-Fi 802.11 b / g / n, Wi-Fi Direct, hotspot
Bluetooth 4.0, A2DP
GPS Yes, with A-GPS
NFC No
Radio stereo FM, RDS
USB microUSB 2.0
Light sensor configuration
Li-Ion 1300mAh battery, removable
Standby up to 433 hours (2G) / Up to 325h (3G)
Talk time up to 6 48 min (2G) / Up to 2 48 min (3G)
Play music until twenty-eight o'clock.
Color MISC Green, Pink, Black
How to flash Alcatel OneTouch Pop C1 4015A mediatek Android mobile phone using SP Flash Tool
There are so many ways to flash Android mobile devices available and presented on the Internet, and you can use any process that is compatible with your smartphone's processor. Some require a PC to complete the flashing, but in this tutorial I'm using SP Flash Tool.
To flash or install firmware on mediatek (MTK) devices
1. You need to download and install SP Flash Tool and USB drivers on your computer. But If you have already installed the tool on your computer, then skip this step.
2. Search and download your mobile phone firmware from here (Mediatek (MTK) Supported Firmware) for your device than extract the zipped file to your computer.
3. Turn off your device for at least 8-9 seconds
4 load the extracted firmware to sp flash tool by clicking on (scatter-loading)
6. Click start and connect the phone to your Computer using the USB Cable. on some mediatek devices you will need to hold volume down or up before connecting your phone.
8. The Flash Tool will recognize the phone. if USB drivers where installed
9. The flash tool should Begin the Flashing Process.
10. Once, flashing process is completed you will see the Success Message in the Flash Tool ( download OK )
Congratulations! Now Close the sp flash Tool and Disconnect your phone from the Computer and set it up.
Google Sites
Report abuse